Universal Security Instruments Battery-Operated Photoelectric Smoke and Fire Alarm, 2-Pack (SS-901-2C/3CC)
Availability:
Sorry, this item has been DISCONTINUED.
- Photoelectric Smoke and Fire Alarm
- 9 Volt Battery Operated
- Loud 85 dB alarm
- Red LED Flashes with Alarm
- Continued Use after Power Outage
- Test Button
- Protective Cover
- Swift Installation Process
- Mounting Hardwire Included
- No Additional Wiring Required
- Listed to UL217 Standard
- 5 Year Limited Warranty
Universal Security Instruments SS-901-2C/3CC Battery-Operated Photoelectric Smoke and Fire Alarms (2 pack) respond quickly to slow-smoldering fires to protect families against deadly threats in the home. This pair of USI Smoke and Fire Alarms is operated by a heavy-duty 9-volt battery (included) and is suitable for installation in houses, apartments, dormitory rooms and mobile homes. Fast and easy to install with no wiring required, the SS-901-2C/3CC features a red LED light that flashes when the alarm goes off and an alarm/power test button to ensure that the device is functioning properly. All hardware is included to mount the round and flat plate that is designed for a quick installation.
This pair of smoke and fire alarms is UL Listed and Federal Housing Authority (FHA) approved to exceed industry standards. For maximum protection, install an alarm inside every bedroom, outside every sleeping area and on all levels. This pair of Universal Security Instruments SS-901-2C/3CC Battery-Operated Photoelectric Smoke and Fire Alarms comes with a 5 year limited warranty.
This pair of smoke and fire alarms is UL Listed and Federal Housing Authority (FHA) approved to exceed industry standards. For maximum protection, install an alarm inside every bedroom, outside every sleeping area and on all levels. This pair of Universal Security Instruments SS-901-2C/3CC Battery-Operated Photoelectric Smoke and Fire Alarms comes with a 5 year limited warranty.
* California and New York Residents - Please note this alarm is not compliant with your State's 10 Year Sealed Battery Alarm Legislation Requirements.
WHY DOES MY SMOKE ALARM 'CHIRP' APPROXIMATELY ONCE EVERY MINUTE?
The smoke alarm chirps to indicate a "low battery" condition, meaning the battery needs to be replaced. Battery powered smoke alarms will chirp a minimum of 30 days before the battery completely loses power.
AC powered smoke alarms with battery backup will chirp indefinitely assuming AC power is present; if battery power is low, or battery is removed; until a fresh battery is installed. Approved replacement batteries are listed on the back of each smoke alarm and in the user's manual.
Certain model smoke alarms with a silence button (designed to silence the alarm during a nuisance alarm) may chirp to indicate the smoke alarm is in the silence mode. The chirp will stop after approximately 8 minutes and the smoke alarm will return to its normal operation.
AC powered smoke alarms with battery backup will chirp indefinitely assuming AC power is present; if battery power is low, or battery is removed; until a fresh battery is installed. Approved replacement batteries are listed on the back of each smoke alarm and in the user's manual.
Certain model smoke alarms with a silence button (designed to silence the alarm during a nuisance alarm) may chirp to indicate the smoke alarm is in the silence mode. The chirp will stop after approximately 8 minutes and the smoke alarm will return to its normal operation.
WHAT DOES IT MEAN WHEN THE RED LIGHT ON THE ALARM FLASHES APPROXIMATELY ONCE EVERY MINUTE?
The flashing red light gives a visual indication that the smoke detector is functioning properly. It also indicates a working battery is connected to the smoke alarm.
WHAT DOES THE CONTINUOUS GREEN LIGHT ON MY SMOKE ALARM INDICATE?
When a green light is present on your smoke detector, it means that AC power is currently operating the alarm.
THE GREEN LIGHT ON MY SMOKE ALARM HAS GONE OUT, WHAT DOES THIS MEAN?
If the green light on your smoke detector is not on, it means the AC power has been interrupted to the alarm. Check the circuit breaker and AC wiring to make sure power is still reaching the smoke alarm.
HOW CAN I TELL WHICH SMOKE ALARM IN A MULTI-STATION SYSTEM INITIATED THE ALARM?
When interconnected alarms are alarming, the smoke alarm which initiated the alarm, either by test button or sensing smoke, will flash the red LED light approximately once per second. The red LED light on the other non-initiated interconnected smoke detectors will not be lit but will sound the alarm.
HOW MANY SMOKE ALARMS OR DEVICES CAN INTERCONNECT AT ONE TIME?
The NFPA 72 standard states the interconnect limit is 12 smoke alarms and up to 6 other alarms (heat alarms or carbon monoxide detectors) for a total of 18 total alarms. With 18 alarms interconnected, up to an additional 6 relay modules may be interconnected (for a maximum of 24 devices).
If battery backup alarms and non-battery backup alarms and accessories are mixed in an interconnect system, all devices without battery backup WILL NOT operate during an AC power failure.
CAUTION: USI alarms and accessories should only be interconnected with other USI alarms and accessories. Connecting devices from another manufacturer to USI devices may result in nuisance alarms, failure to alarm, or damage to one or all of the devices in the interconnect system. All interconnected USI alarms should be powered by the same fuse or circuit breaker. Smoke alarms shall not receive their power from a circuit that is protected by a ground fault circuit interrupter. Improper connection will result in damage to the alarm, failure to operate, or a shock hazard.
If battery backup alarms and non-battery backup alarms and accessories are mixed in an interconnect system, all devices without battery backup WILL NOT operate during an AC power failure.
CAUTION: USI alarms and accessories should only be interconnected with other USI alarms and accessories. Connecting devices from another manufacturer to USI devices may result in nuisance alarms, failure to alarm, or damage to one or all of the devices in the interconnect system. All interconnected USI alarms should be powered by the same fuse or circuit breaker. Smoke alarms shall not receive their power from a circuit that is protected by a ground fault circuit interrupter. Improper connection will result in damage to the alarm, failure to operate, or a shock hazard.
Product Details
- Warranty: 5 year Limited Warranty
- Alarm Battery: 9 volt (Included)
- Alarm Sensor Type: Photoelectric
- Manufacturing Credits: ISO 9001 certified factory, UL listed & CSFM listed
- Product Dimensions (W x H x D): 5.50 x 5.50 x 1.75 in.
- Weight: 0.44 lbs.
Product Specs
UPC:
042741029018
MPN:
SS-901-2C/3CC
Category:
Product Manuals
USI Battery-Operated Photoelectric Smoke Alarm, 2-Pack (SS-901-2C/3CC) Video
If you are interested in ordering a large quantity of items you may qualify for volume pricing discounts. Volume Discount Pricing is a great way for customers to save big on large, bulk orders of most items available in our store. Please send a bulk order request to our friendly sales staff so they may create a quote and provide personal service for your order! You will receive a response within 1-2 business days and our office hours are Monday through Friday, 8am-5pm CST.
We make it as easy as possible to ensure you get the lowest prices available:
- Let us know what products & the quantities you are interested in.
- Get a detailed quote from a dedicated sales rep.
- Our warehouse ships directly to you.
- You enjoy the savings & are now a preferred customer.
Direct From Warehouse Pricing
Related Products
5
4
3
2
1
3 customers recommend this product
USI Battery-Operated Photoelectric Smoke Alarm, 2-Pack (SS-901-2C/3CC) Reviews
vicki dorsey
January 21, 2019
Verified Purchase
Very easy in replacing our older ones...
me
May 8, 2018Best I Ever Had
If it wasn't for This smoke alarm, I probably wouldn't be here.
Brenda Young
April 24, 2018
Verified Purchase
GOOD PURCHASE
This was my second purchase of this item. The first lasted ten years - very satisfied!