Universal Security Instruments Sensing Plus Dual Sensor Hardwired Smoke and Fire Detector With 10 Year Battery Backup (AMI1061SB)
- 2-in-1 Smoke and Fire Smart Alarm provides 10 years of continuous protection against fast flaming and slow smoldering fires.
- New Security Sensing Plus® multi criteria smoke & fire sensor uses AI-artificial intelligence techniques that can differentiate and classify smoke & fire profiles.
- Hardwired alarm with a 10-year lithium-free alkaline battery backup that provides a decade in peace of mind even when the power goes out.
- Built-in microprocessor eliminates virtually all nuisance alarms.
- Maintenance free battery power provides 10 years of safety protection.
- Power and alarm LED's
- Test/silence button
- Loud 85 dB alarm
- Tamper-proof design prevents other from tampering with alarm's battery.
- 10 year warranty on both battery & alarm
- Interconnectable with up to 24 compatible devices
-
USI 8th Generation Smoke Detector meets the latest industry standards.
The USI AMI1061SB 2-in-1 Sensing Plus® Hardwired Smoke and Fire Alarm provides 10 years of continuous protection against deadly threats in the home. This 8th generation smoke detector uses New Sensing Plus® Multi-Criteria Detection that provides the benefits of both photoelectric and ionization alarms in one device to protect against fast flaming and slow smoldering fires. Perfect for new or replacement installations, this USI Electric Smoke Detector is suitable for houses, apartments and mobile homes. This 2-in-1 alarm includes a 10 year lithium free battery backup that will never have to be replaced throughout the life of the detector, giving you a decade's worth in peace of mind even in the event of a power outage.
10 Year Permanent Power also saves money from battery replacements (up to $38.00 over the 10-year life of the alarm), eliminates annoying low battery chirps and helps the environment by reducing environmental waste from disposed batteries. This hardwired smoke and fire alarm features microprocessor intelligence that assists in completely eliminating nuisance alarms, a single silence/test button to quiet a non-hazardous alarm and an end-of-service life warning that sounds when it's time to replace the smoke detector's battery (approximately 10-years from activation).
Perfect for replacing existing Universal Electric Smoke Alarms, this hardwired smoke and fire detector features a large mounting base to cover imperfections in drywall and the option to replace retrofitting applications. The quick activation battery pull tab makes it easy to install while the deactivation key switches the alarm off and makes the batteries safe for disposal. Once the 10 year smoke and fire alarm is deactivated, the tamper resistant feature turns on to prevent deactivated alarms from being reinstalled.
Bring Your Home up to Code with 8th Generation Alarms
Exceeding industry standards and meeting the latest UL 217 8th Edition for smoke detection, this smoke and fire detector features approvals from the California State Fire Marshal and Federal Housing Authority (FHA) for ultimate peace of mind. Its innovative Sensing Plus® Multi-Criteria Detection provides a trifecta of benefits: minimizing nuisance alarms from cooking, detecting both slow-smoldering and fast-flaming fires (including those in polyurethane foam), and remaining operational even during electrical surges.
For maximum protection, install a smoke and fire alarm inside every bedroom, outside every sleeping area and on all levels. The USI AMI1061SB 2-in-1 Sensing Plus® Hardwired Smoke and Fire Alarm comes with a 10-year limited warranty that covers both the battery and alarm.
Meets New Laws & Legislations - This alarm exceeds industry standards, and is listed to UL Standard UL 217 8th Edition and is California State Fire Marshal approved.
Guide To Replacing Your USI-1204 Smoke & Fire Alarm With A Comparable Model
- 1 To begin, you'll want to turn off the electricity to the smoke alarm circuit. You'll know the power is off when the green LED light on the alarm is no longer lit. You'll now be able to twist off the front of the USI-1204. This will allow you to disconnect the alarm from the front of its base.
- 2 You'll now be able to unscrew the USI-1204 base from the wall. Do not remove the screws from the ceiling as you'll be using them for the new alarm. Pull down the detector once it's loose to expose the wire nuts. Unscrew the wire nuts to finish uninstalling the USI-1204.
- 3 You'll begin by installing the AMI1061SB's mounting bracket to the screws still attached to the wall. Unlike the previous model, the AMI1061SB comes equipped with a quick connector. You'll be using this quick connector to connect the corresponding wires to each other with the screw wire nuts.
- 4 You can now plug in the quick connector into the back of the alarm. Be sure to snap the connector in tightly to ensure everything is properly connected. You can now twist the alarm into the mounting bracket you secured earlier. Do not turn on the breaker until the AMI1061SB and any other alarms are connected. It's now safe to flip your breaker back on. You'll want to press the Test Button to make sure the alarm is operating (also check to see if the LED is green).
- Warranty: 10 Year Limited Warranty on both battery and alarm
- Power Source: Hardwired
- Alarm Battery: 10 Year Lithium Free Battery Backup
- Alarm Sensor Type: New Security Sensing Plus Multi Criteria Detection Technology (Ionization & Photoelectric)
- UL Certifications: UL 217 8th Edition
- Manufacturing Credits: ISO 9001 certified factory, UL listed & CSFM listed
- Packaging: Easy Open Box Packaging
- Product Dimensions (W x H x D): 5.63 x 5.63 x 1.75 in.
- Product Weight: 0.42 lbs
If you are interested in ordering a large quantity of items you may qualify for volume pricing discounts. Volume Discount Pricing is a great way for customers to save big on large, bulk orders of most items available in our store. Please send a bulk order request to our friendly sales staff so they may create a quote and provide personal service for your order! You will receive a response within 1-2 business days and our office hours are Monday through Friday, 8am-5pm CST.
- Let us know what products & the quantities you are interested in.
- Get a detailed quote from a dedicated sales rep.
- Our warehouse ships directly to you.
- You enjoy the savings & are now a preferred customer.
Customers Also Bought
Related Products
USI Sensing Plus Dual Sensor Hardwired Smoke and Fire Alarm Reviews
as ordered and have installed good
This new model had a different base plate from my old model but it was easy to replace. I love the fact I wont have bird tweets when the 9 volt battery runs out which it constantly did. Quick service and good technical tips from Nickole
Exactly what I wanted to replace my 15yo detectors. Everything went smooth and fast with my order.
Quick delivery and great prices with a large variety of products. I purchased smoke alarms twice from this company and have been very satisfied with their products.
Invested in new detectors for whole house: hard wired smoke, smoke and CO with sealed battery backup, sealed battery smoke and CO. Had to rewire as different plug than older units. Took a few hours almost 20 units, but straightforward. Happy with decision, purchase, and products.